Friday, November 11, 2016

History of William Gilpin, Wedges Mills and Churchbridge Works

Trades' Guide, 1879, page 157
William Gilpin was an English tool manufacturer in Cannock, north of Birmingham. The firm operated 2 works near each other, Churchbridge Works and Wedges Mills. Gilpin operated from as early as 1834 to 1946 or later. Grace's Guide has a short page about them. We will try to add to this information.
History, Gazetteer and Directory of Staffordshire, 1834 

Gilpin brick and moulder's trowels
The Churchbridge Edge Tool and Axle Works, Churchbridge, 1926 - Britain from Above

16 comments:

  1. Afternoon, I have a draw knife with the trade mark, I would like some more info if possible ,
    with thanks steve.

    ReplyDelete
    Replies
    1. I'm sorry, this is all the information I have now.

      Delete
  2. Just found a 4.5pound axe in my father's tools. Did they make axes?

    ReplyDelete
    Replies
    1. I literally just purchased a 4.5 axe head from a carboot sale. Lovely ace heads. Came here looking for more info too!

      Delete
  3. I have a meat clever made by this company. The stamp shows crossed axes and below that W.Gilpin,Wedge Mills. The final word begins Warra with probably three missing letters and ending in D. Any ideas? Thanks in advance.

    ReplyDelete
    Replies
    1. Sorry the information I have on them is limited and I don't know what the rest of the word is.

      Delete
    2. Warranted - that's what it says on my draw knife

      Delete
    3. Hello , I have an ax wit simlar marking and the word you are loking for is "Warranted"

      Delete
  4. Still using, and loving, my Grandad's Gilpin draw-knife. He used to make and repair cart wheels with it

    ReplyDelete
  5. Hi,
    I have a pair of pliers marked “W Gilpin” one side, and L&NWR the other.
    Have to be before 1922 as LNWR became LMS after that Date.

    ReplyDelete
  6. I just got a draw knife w gilpin wedges Mills warranted and the number 3 was doing a job for a old lady and she wanted sheds gone and said I can have anything I can find got loads of funny shape trowels and one on top of page I have as well

    ReplyDelete
  7. I just got a draw knife w gilpin wedges Mills warranted and the number 3 was doing a job for a old lady and she wanted sheds gone and said I can have anything I can find got loads of funny shape trowels and one on top of page I have as well

    ReplyDelete
  8. I own an oxwagon axle made by Gilpin at Wedges Mill in 1906. Must have found it's way to my grandfather's blacksmith shop in Botswana via South Africa

    ReplyDelete
  9. Hi my Mum has had a meat cleaver for years, she recently gave it to me, my son and I decided to clean it up, replace the wooden handle. We buffed the surface rust off and found the name W Gilpin Wedgesmills Warpantdo stamped on one side, it also has PAT N 133 F stamped on the same side.

    ReplyDelete
    Replies
    1. It says, W Gilpin wedgesmills Warranted. The 133F is a lamb chopper. They made a round nose and a square nose version. You can find a picture of the square version in the Gilpin tool catalogue.

      Delete

Note: Only a member of this blog may post a comment.